A Method To Reduce Butterfish Retention In The Offshore Directed Loligo Squid Fishery Through The Use Of A Bycatch Reduction Device (BRD) Adapted To Pre-Existing Gear

 Funded by NMFS Research Set-Aside Program




 This research project is another step in the growing field of conservation gear technology whose main intent is to reduce or ideally eliminate the negative interaction that occurs between fishing and protected, prohibited, or non-targeted species. In this case, the goal is to reduce the quantity of butterfish caught during the targeted Loligo squid fishery.  Despite the lack of a significant directed fishery for butterfish, the species has been listed as overfished by the Mid-Atlantic Fisheries Management Council (MAFMC). The MAFMC, which is the primary organization responsible for the management of fisheries occurring in federal waters for the mid- Atlantic region, has stated that the discarding of butterfish in other trawl fisheries is a major concern in the effort to rebuild the butterfish stock.  The Loligo squid fishery has been recognized as the largest contributor of butterfish bycatch and this is due to the co-occurrence and behavioral similarities of butterfish and squid relative to fishing effort.  The MAFMC has created a butterfish bycatch mortality cap within the Loligo squid fishery as a means to rebuild the butterfish population. This cap, slated to begin in 2011, will reduce butterfish bycatch and discard mortality by essentially closing the Loligo squid fishery once the cap has been reached.  The importance of this research can now be realized as we see the need to rebuild the economically low value butterfish stock while maintaining the high value squid fishery.

     The goal of this project is to develop a bycatch reduction device (BRD) that will prove effective at reducing the number of butterfish caught in the Loligo squid fishery.  In addition, in order to be deemed successful the BRD cannot cause significant reductions in squid catches and it must be adaptable to existing fishing gear.  The approach that we (Cornell Cooperative Extension Marine Program) took was to develop two separate BRD’s that can be used in conjunction or separately.  The first BRD (BRD1) is a panel or panels constructed of larger mesh than that of the surrounding net.  This panel will be inserted into the net ahead of the codend (the codend is the portion of a trawl net that collects the fish and allows them to be brought aboard and dumped onto a fishing vessel).  The placement of the panel/panels within the net could also be varied so the location could be either top and/or bottom or laterally (one or both sides).  The purpose of the large mesh panel/panels is to offer actively swimming butterfish a chance at escapement before being captured in the codend.  The second BRD (BRD2) is simply a readily available black tarpaulin that will be stitched around the entire inside circumference of the net.  The tarpaulin will be approximately two feet in length and again will be placed just ahead of the codend.  In addition, placed immediately ahead of the tarp will be a large mesh panel similar in design to that of BRD1.  The purpose of this black tarp is to present fish with the false impression that their passage is blocked and this will promote them to use the large mesh panel to escape capture in the codend.   

     The research for this project will be done using a single vessel that is capable of towing two trawl nets simultaneously.  This is an ideal situation when testing fishing gear

because it allows the experimental gear to be compared directly to the existing gear.  It essentially eliminates an array of variables that would occur if either two boats were used or one boat was used that altered its fishing between existing and experimental gear.  Simply put, the vessel will tow a standard, unaltered trawl net (control net) alongside the exact same net that that has been outfitted with a BRD (experimental net).  All fishing will occur as would normally be done by the vessel on a standard commercial fishing trip.  Comparisons of the control and experimental nets will be based on differences in butterfish and Loligo squid retention and total catch.  We will also attempt to use video to observe the behavior of both fish and squid relative to the BRD’s.  Results of the video work and initial assessment of collected data will allow for fine tuning and alterations to the BRD designs throughout the project.

     To date Cornell has completed a two day shakedown cruise that included some video of the BRD’s at work.  The quality of the video was better than we ever could have anticipated and provided an ideal opportunity to make some critical alterations to improve the performance of the BRD’s before the first research cruise scheduled in December 2010.  The hope is that this project will provide substantial data resulting in practical solutions that will help address the problematic butterfish stock without hampering the successful squid fishery.  Fisheries managers will have a tool that will alleviate the effects of a butterfish bycatch mortality cap and fishermen will be able to continue to fish for the lucrative Loligo squid for a nominal investment.


Stack161 from Cornell Extension Marine Program on Vimeo.